HOME > PRODUCTS > TFT LCD

12.3" For Automotive LVDS IPS LCD Display(1920x720)

Model No. APS-C123HAX04.0-00

►Size:12.3"

►Resolution : 1920x720 dots

►View Direction : ALL o`clock

►Interface : LVDS

►IC Part No : -

►Control-Board : Yes

►Brightness(cd/m2):1200

►Frame Through Hole: No

►Touch Screen : No

►Operating Temperature : -30~85℃

DESCRIPTION

Aptus For Automotive LVDS IPS 12.3" TFT LCD Display

APS-C123HAX04.0 is a 12.3 inch IPS LVDS TFT LCD display module, resolution 1920x720 pixels. This 12.3" TFT display supports LVDS interface, supply voltage (VCI) range is from 3.0V to 3.6V, with brightness 1200nits (typical value), contrast ratio 1400.

This 12.3 inch LVDS TFT LCD Display is portrait mode with IPS (In-Plane Switching) Panel which having the advantages of wider viewing angle of Left: 85 / Right:85 / Up:85 / Down:85 degree (typical) . It is ideal for automotive devices, medical devices, etc. This module can be operating at temperatures from -30℃ to 80℃; its storage temperatures range from -40℃ to 90℃.

DRAWING

8a7c3ef3ae793acea5e02085c8c52bb.png

SPECIFICATIONS

Interface

LCM PIN Definition

NO.ItemUnitSpecification
1
Display Resolutiondot1920 RGB(H) x 720 (V)
2Active Areamm292.032 (H) x 109.512 (V)
3Screen Sizeinch12.3” (Diagonal)

4

Dot Pitchμm152.1x152.1
5Color Configuration--R. G. B. Stripe
6Color Depth--16.7M Colors
7Overall Dimensionmm296.032 (H) x 118.844 (V) x 1.03 (T)
8Display Mode--
Normally Black
9Surface TreatmentHHard Coating

General Specifications

NoPin NameI/ODescription
1GND
Ground
2NC
Please keep floating
3VGL
Charge bump voltage for gate driver
4VGL
Charge bump voltage for gate driver
5NC
Please keep floating
6VGH
Charge bump voltage for gate driver
7VGH
Charge bump voltage for gate driver
8NC
Please keep floating
9AVDD
Power input for source driver and power circuit
10AVDD
Power input for source driver and power circuit
11NC
Please keep floating
12AVEE
Power input for source driver and power circuit
13AVEE
Power input for source driver and power circuit
14NC
Please keep floating
15VCI
Power supply for the analog circuit
16VCI
Power supply for the analog circuit
17VCI
Power supply for the analog circuit
18NC
Please keep floating
19NC
Please keep floating
20RESX
Display part reset pin
21GND
Ground
22DBIST
Enable built-in self test (BIST) function.
23GND
Ground
24DISP_SDA
Display SPI data interface
25DISP_SCL
Display SPI Clock
26SPI_CSX
Serial Interface chip enable signal for SPI interface.
27GND
Ground
28DISP
IC Display on/ off control
29PON
IC Power on/off control (=standby)
30GND
Ground
31D03_P
Positive LVDS differential input.
32D03_N
Negative LVDS differential input
33GND
Ground
34Ck0_P
Positive LVDS differential clock input
35Ck0_N
Negative LVDS differential clock input
36GND
Ground
37D02_P
Positive LVDS differential input.
38D02_N
Negative LVDS differential input
39GND
Ground
40D01_P
Positive LVDS differential input
41D01_N
Negative LVDS differential input
42GND
Ground
43D00_P
Positive LVDS differential input
44D00_N
Negative LVDS differential input
45GND
Ground
46FAIL_DET
Fail detect signal output.
47GND
Ground
48FCS
Function control by Hardware / Software selection
49RL
Horizontal shift direction (source output) selection.
50TB
Vertical shift direction (gate output) selection.
51GND
Ground. Only for OTP.
52VOTP
Used for external power input for OTP program.
53GND
Ground
54TP_RST
Touch part reset pin
55GND
Ground
56TP_I2C_SDA
Touch I2C data
57TP_I2C_SCL
Touch I2C clock
58TP_ATTN
Touch I2C interrupt
59GND
Ground
60GND
Ground
Absolute Maximum Rating
ItemSymbolMinTypMaxUnit
Operating TemperatureTOP-30-85
Storage TemperatureTST-40-95

Electrical Characteristics

Operating conditions

ItemSymbolMinTypMaxUnit
Supply VoltageVCI3.03.33.6V
Current consumptionICI-
37.5-mA

LED driving conditions

ItemSymbolMinTypMaxUnit
LED voltageVLED29.7
3334V
LED currentILED-
320-mA
LED Life Time--50,000-Hr
go top