7.3inch 1200 x 280 Automobile LCD module

7.3inch 1200 x 280 Automobile LCD module

Model No. DBT073TEN40L05

►Size:7.26"

►Resolution : 1200x280 dots

►View Direction : 9 o`clock

►Interface : LVDS

►IC Part No : --

►Control-Board : Yes

►Brightness(cd/m2):600

►Touch Screen : No

►Operating Temperature : -20~70℃

PDF DOWNLOAD

ADD TO INQUIRY

BACK to LIST

DESCRIPTION

Aptus LVDS TN 7.3" TFT LCD Display

DBT073TEN40L05 is a 7.3 inch TN LVDS TFT LCD display module, resolution 1200x280 pixels. This 7.3" TFT display supports LVDS interface, supply voltage (VDD) range is from 3.0V to 3.6V, with brightness 600 nits (typical value), contrast ratio 1000.

This 7.3 inch LVDS TFT LCD Display is portrait mode with TN Panel. It is ideal for automotive devices, medical devices, etc. This module can be operating at temperatures from -20℃ to 70℃; its storage temperatures range from -30℃ to 80℃.

DRAWING

SPECIFICATIONS

Interface

LCM PIN Definition

Pin No.	Symbol	I/O	Function	Remark
1	LEDK	P	LED Cathode
2	LEDK	P	LED Cathode
3	LEDA	P	LED Anode
4	LEDA	P	LED Anode
5	GND	P	Power Ground
6	RXCLK-	I	Negative LVDS Differential clock input
7	RXCLK+	I	Positive LVDS Differential clock input
8	GND	P	Power Ground
9	RXIN0-	I	Negative LVDS Differential data input(0)
10	RXIN0+	I	Positive LVDS Differential data input(0)
11	GND	P	Power Ground
12	RXIN1-	I	Negative LVDS Differential data input(1)
13	RXIN1+	I	Positive LVDS Differential data input(1)
14	GND	P	Power Ground
15	RXIN2-	I	Negative LVDS Differential data input(2)
16	RXIN2+	I	Positive LVDS Differential data input(2)
17	GND	P	Power Ground
18	RXIN3-	I	Negative LVDS Differential data input(3)
19	RXIN3+	I	Positive LVDS Differential data input(3)
20	GND	P	Power Ground
21	NC	---	No Connection
22	NC	---	No Connection
23	SELB	I	6bit/8bit mode select, L: 8-bit H: 6-bit
24	RESET	I	Global reset pin
25	DIMO	O	Backlight CABC controller signal output Keep floating if not used
26	STBYB	I	Standby mode control signal
27	L/R	I	Horizontal inversion , Normally pull high
28	U/D	I	Vertical inversion, Normally pull low
29	CABCEN0	I	CABC H/W enable pin,Normally pull low
30	CABCEN1	I	CABC H/W enable pin,Normally pull low
31	NC	---	No Connection
32	NC	---	No Connection
33	VGL	P	Gate OFF Voltage
34	VGH	P	Gate ON Voltage
35	VCOM	P	Common voltage input
36	GND	P	Power Ground
37	VDD	P	Power Supply
38	VDD	P	Power Supply
39	AVDD	P	Power for Analog Circuit
40	GND	P	Power Ground

General Specifications

No.	Item	Specification	Unit
1	LCD size	7..26(Diagonal)	inch
3	Resolution	1200(RGB)x280	dot
4	Display mode	Normally White
5	Dot pitch	0.150x0.150	mm
6	Active area	152.4 (W) x 91.44 (H)	mm
7	Module size	192.20(W) x 54.00(H) x 4.80(D)	mm
8	Surface treatment	Anti-Glare
9	Color arrangement	RGB-stripe
10	Interface	LVDS

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	-	70	℃
Storage Temperature	TST	-30	-	80	℃